ATLAS II
Atlas II is a solid, suspended (or semi-suspended) aggregate designed for pre-sowing cultivation, equipped with a string roller ø 400 mm and a spring tooth skimmer – ensuring precise leveling and crushing.
Sections of teeth tailored to needs
Three-row section of teeth (SE)
Effectiveness on heavy soils
Precise field leveling
Depth adjustment
Effective loosening and soil undercutting
- Two cultivation sections
With a goosefoot cut width of 260 mm. - SX cultivation section – 45 × 260 mm
Spring tooth with an additional reinforcing spring, with a goosefoot cut width of 260 mm. SZ cultivation section – 45 × 25 × 260 mm, rigid working tooth with screw protection, with a goosefoot cut width of 260 mm. - Three-row tooth section SE
SE cultivation section – 32 × 12 mm, with an additional reinforcing spring 32 × 10 mm and goosefoot with a cut width of 175 mm.
Effective processing of soil in every type of position
- Crosskill roller
One of the most important elements of cultivation aggregates are the rear rollers that treat the soil. The ATLAS II aggregate is equipped with a standard single-tooth string roller, while the Crosskill roller with a diameter of ø400 mm is available as an option for an additional fee. Built of cast iron rings, it performs excellently on heavy and cohesive soils. - Rear string roller
The standard equipment of the ATLAS II aggregate is a string roller with a diameter of 400 mm. Behind the roller is suspended a toothed skimmer with spring pressure, which supports leveling the field surface.
Quick and convenient depth adjustment
- Hydraulic depth adjustment
Threaded adjustment, which requires a lot of the operator’s energy, can be replaced – as an optional extra – with hydraulic adjustment with a pawl system. This solution is particularly useful on heterogeneous soils with varying structures – so-called mosaic soils. A large scale visible from the tractor cab indicates the approximate working depth.
Suspension axis
Rigid frame
Front skimmer
Front string roller
Two-row section of elastic teeth SX
Middle skimmer
Rear string roller
Rear toothed skimmer
Side deflectors
Depth adjustment
Equipment for an additional fee
- two-row tooth section SZ
- four-row tooth section SV
- three-row tooth section SE
- hydraulic depth adjustment of the field section
- set of soil looseners [instead of front runner]
- crosskill roller with scrapers ø400 mm
- category III suspension axle 70/965-ø36 mm
- set of warning signs with LED lighting
TECHNICAL SPECIFICATION
| ATLAS II | 3 | 4 |
|---|---|---|
| Masa [kg] | 1 720 | 2 180 |
| Zapotrzebowanie mocy [KM] | 110–150 | 130–170 |
| Liczba zębów SX lub SZ [szt.] | 12 | 16 |
| Liczba zębów SV [szt.] | 30 | 40 |
| Liczba zębów SE [szt.] | 20 | 25 |
| Głębokość pracy [cm] | 12 | 12 |
Do you want to know more?
Contact us! Our specialists will gladly provide you with detailed information, assist you in selecting the right model, and present the possibilities of our products.
Files to download
Do you want to know more details about this machine? Below are files to download, which will help you expand your knowledge and check all the parameters you are looking for.
- List item #1