HERON
The HERON models are built from high-quality components. The sprayers feature a compact design, very minimal transport width
and height not exceeding 3.0 meters. Simple operation
and uncomplicated construction facilitate use and minimize the need for maintenance activities.
Operating width
The UNIA HERON sprayer offers a wide range of operating widths,
allowing the machine to adapt to different crop surfaces
and working conditions. Thanks to the modern construction of the spraying boom
it ensures precise and effective coverage of the field, minimizing losses
of plant protection products.
Bar independent with the possibility
of reducing the working width (quartering)
Automatic leveling system based on two sensors (sensors) maintaining the set height across the entire working width.
System levelled beam
Automatic leveling system based on four sensors (sensors) maintaining the set height independently for the left and right sides of the beam.
Equipment HERON
- machine constructed according to the homologation standard (EU 167/2013)
- main tank: 4000 liters
- clean water tank: 400 liters
- tank for washing hands
- side cover of control valves with lighting
- hydraulic support foot
- three centrifugal cleaners of the main tank
- electronic liquid level indicator
- damped drawbar
- side splitter with suction lance (60 liters)
- independent beam with tilt (three-element wings)
- beam with spatial construction, folded in transport position horizontally to the side
- beam reduction to the second working width (quartering)
- hydraulic lifting of the beam up to 2.3m with hydraulic damping
- damped pendulum beam stabilization system
- liquid system: stainless steel 1/2’’ with sprinklers every 50 cm
- pneumatic brakes, two-circuit
- hand / parking brake
- wheel fenders
- pneumatic axle damping
- storage for plant protection products
- three-stage filtration system (main filter, self-cleaning filter, section filters on the boom)
- hydraulic connector Ø52mm
- night LED boom lighting (blue light)
- road LED lighting with flashing light
- beam 21/15m
- beam 24/18m
- beam 27/21m
- beam 28/20m
- beam 30/20m
- 7 sections
- 7 sections (includes liquid circulation)
- 9 sections
- 9 sections (includes liquid circulation)
- 11 sections (includes liquid circulation)
- 13 sections (includes liquid circulation)
- 15 sections (includes liquid circulation)
- 17 sections (includes liquid circulation)
- ecoStop system (splitting sections to individual sprinklers / includes liquid circulation)
- DynaJet system (pulse spraying with compensation on corners / splitting sections to individual sprinklers / includes liquid circulation)
- heads with 4 positions with sprinklers: SJ7A-04-VP / AITTJ60-11004-VP / IDK 120-03 / IDTA 120-0.4 C
- heads with 3 positions with sprinklers: TT11008-VP / SJ7A-04-VP / AITTJ60-11004-VP
- control ISOBUS Basic (missing: monitor, navigation, licenses, variable dosing)
- control ISOBUS Pro (10” display, joystick, GPS navigation, licenses: UT, TECU, ISB, AUX-N, TC-GEO, TC-SC, TC-BAS)
- pump flow 300 L/min - PTO drive (540 Nm. L.nom 1210)
- pump flow 400 L/min - PTO drive (540 Nm. L.nom 1210)
- pump flow 400 L/min - hydraulic pump drive (hydromotor)
- rigid axle with the possibility of adjusting the wheel spacing (1.80 - 2.25m)
- automatic steering axle with the possibility of adjusting the wheel spacing: 1.80 / 2.00 / 2.25m (factory spacing 1.80m)
- automatic steering axle with the possibility of adjusting the wheel spacing: 1.80 / 2.00 / 2.25m (factory spacing 2.00m)
- automatic steering axle with the possibility of adjusting the wheel spacing: 1.80 / 2.00 / 2.25m (factory spacing 2.25m)
- hydraulic power supply from the tractor (minimum hydraulic outflow: 75 L/min)
- autonomous hydraulic system of the sprayer
- wheel: VF 12.4 R50
- wheel: 13.6 R48
- wheel: 14.9 R46
- wheel: 16.9 R38
- wheel: 18.4 R38
- wheel: 20.8 R38
- wheel: 580/70 R38
- drawbar with height adjustment (factory mounted in upper position)
- drawbar with height adjustment (factory mounted in lower position)
- eye hitch Ø40mm
- eye hitch Ø50mm
- ball hitch K80
- Boom Leveling system (automatic maintenance of the set working height across the entire width of the beam)
- Boom Leveling Plus system (automatic maintenance of the set working height independently for the right and left sides of the beam)
TankMatic system (external control terminal for automatic filling of the tank)
external pressure washer
hose for filling with Cam-Lock connector (6m)
EasyFlow system
Agriculture 4.0 package (module for two-way, wireless data transfer - IOTbox, access to the management platform for 3 years, weather station)
Pulse spraying technology UNIA DynaJET
Traditional spraying of protective agents requires the operator to carefully match the travel speed and working pressure to the working conditions. The UNIA DynaJET system controls pressure and droplet size across a wide range of machine travel speeds, allowing the operator to choose the optimal speed, given the circumstances, while maintaining a constant droplet size.
The appropriate dosing of the spray is achieved by varying the dosage time of the agent through the nozzle, and the variable droplet size by changing the pressure, which compared to the conventional system provides much wider regulation possibilities. The Unia DynaJET system will be optionally installed in all models of the EUROPA XL sprayer.
TECHNICAL SPECIFICATION
| MODEL | HERON |
|---|---|
| Tank volume [l] | 3000 / 4000 / 5000 / 6000 |
| Working width [m] | 21 / 24 / 27 / 28 / 30 / 36 |
| Number of sections | 7–17 |
| Boom lifting range [m] | 0.5–2.3 |
| Pump [flow] | POLY 2300 [300–400 l/min] |
Do you want to learn more?
Contact us! Our specialists will gladly provide you with detailed information, help you choose the right model, and present the possibilities of our products.
Files to download
Do you want to know more detailed information about this machine? Below are files to download that you can use to broaden your knowledge and check all the parameters you are looking for.
- Product catalog - UNIA HERON
- Valves and controllers
- Sprayers
- Computers
- ISOBUS computers
- Warranty card
- UNIA Catalog 2025
- List item #1